Shipping and Storage Costs per Kit at Region and Depot level
Introduction
The shipping and storage costs can be defined in the dispensing units table, but not individually for depots or regions. To reach this level of detail, use of the shipping and storage costs per kit at region and depot level table is needed.
Note: If costs are defined in the dispensing units table and in the shipping and storage costs per kit at region and depot level table, values in the dispensing units table will be overridden.
Example
Shipping and storage costs per kit at region and depot level
Master Data |
Dispensing unit |
Depot |
Region |
Site Shipment cost per kit |
Depot shipment cost per kit |
storage cost per kit per month at depot |
storage unit |
Number of kits per storage unit |
|
Kit_A |
USA_Depot |
USA |
4 |
100 |
2 |
small box |
50 |
|
Kit_A |
USA_Depot |
USA |
4 |
|
2 |
large box |
100 |
|
kit_A, Kit_B |
EU_Depot |
GER, FRA |
6 |
150 |
5 |
|
|
|
Kit_B |
EU Depot |
|
8 |
200 |
5 |
|
|
In RED are Mandatory Attributes
Column Definitions
Master Data
Defines master data to be used for a given row. An active, valid MD item description must be entered in order for master data to be loaded and interpreted. See Master Data Rules.
Dispensing unit
Defines for which dispensing unit the specified shipment and storage costs apply. Dispensing unit code is a mandatory entry. If no dispensing unit code is specified, no warning or error will be shown, but the row will be ignored.
Must be a valid dispensing unit code as specified in the dispensing units table.
Depot
Defines for which depot(s) the specified shipment and storage costs apply. Must be a valid depot code as specified in the depots table.
Region
Defines for which region the specified shipment and storage costs apply. Must be a valid region as specified in the network table.
Site Shipment cost per kit
Defines the site shipment cost per kit for the specified depot(s) or region(s).
Must be a valid decimal number. If an invalid entry is made, no error is shown, but the value is ignored.
Must be a single decimal number. If more than one decimal is entered, a warning with the following message is shown:
More than one positive float found but only one was expected, '[first value specified]' will be used
Depot shipment cost per kit
Defines the depot shipment cost per kit for the specified depot(s) or region(s).
Must be a valid decimal number. If an invalid entry is made, no error is shown, but the value is ignored.
Must be a single decimal number. If more than one decimal is entered, a warning with the following message is shown:
More than one positive float found but only one was expected, '[first value specified]' will be used
Storage cost per kit per month at depot
Defines the storage cost per kit per month for the specified depot(s) or region(s).
Must be a valid decimal number. If an invalid entry is made, no error is shown, but the value is ignored.
Must be a single decimal number. If more than one decimal is entered, a warning with the following message is shown:
More than one positive float found but only one was expected, '[first value specified]' will be used
Storage unit
Defines for which storage unit(s) the specified storage costs apply. Must be a valid storage unit code as specified in the storage units table.
Number of kits per storage unit
Defines the number of kits per storage unit for the specified storage unit in the specified depot(s) or region(s). Must be a single, valid integer. If more than one integer is entered, a warning with the following message is shown:
More than one positive integer found but only one was expected, '[first value specified]' will be used